Frontier Sawmill Specifications

 
Log Diameter  23” (59 cm)  27” (69 cm)  31” (79 cm)
Log Length 11’ (3.4 m)  11’ (3.4 m)  11’ (3.4 m) 
Board Width 20” (51 cm)  23” (59 cm)  23” (59 cm) 
Additional Track Extensions 7’ (2.1 m)  7’ (2.1 m)  7’ (2.1 m) 
Power Selections 7 hp (208 cc) Briggs (recoil start) (EU Only)
7½ hp (250 cc) Briggs (recoil start) (N/A in EU)
10 hp (306 cc) Briggs (recoil start)
4 kW electric motor (400 V, 3 Ph) (EU Only)
13½ hp (420 cc) Briggs (recoil start)
13½ hp (420 cc) Briggs (electric start)
5.5 kW electric motor (400 V, 3 Ph) (EU Only)  
13½ hp (420 cc) Briggs (recoil start)
14 hp (429 cc) Kohler (electric start)
5.5 kW electric motor (400 V, 3 Ph) (EU Only) 
Patented Laminated Sawhead  ✔  ✔  ✔
Patented Auto-Locking Sawhead  ✔  ✔  ✔
Variable Depth Selection  ✔  ✔  ✔
EZ Blade Tension  ✔  ✔  ✔
Patented Auto-Locking Adjustable Guide  ✔  ✔  ✔
Chip-Extractor-Compatible Sawdust Exhaust Chute  ✔  ✔  ✔
Leveling Feet  ✔  ✔  ✔
Blade Lube  ✔
3.2 Gal (12 litres)
 ✔
3.2 Gal (12 litres)
 ✔
3.2 Gal (12 litres)
Stainless Steel Bunk Caps    Optional  ✔
Cam Dog  Optional  Optional  ✔
Trailer System  Optional  Optional  Optional
Patented Auto-Lube System  Optional  Optional  Optional
Track Length  14’ (4.3 m)  14’ (4.3 m)  14’ (4.3 m)
Track Width  32 ¼” (82 cm)  37” (94 cm)  37” (94 cm)
Blade  129” (327 cm) x 1 ¼” SabreTooth  144” (366cm) x 1 ¼” SabreTooth  144” (366 cm) x 1 ¼” SabreTooth
Bandwheels  16” (41 cm) cast-iron  19” (48cm) cast-iron  19” (48 cm) cast-iron
Carriage Configuration  Rigid 4-post with patented laminated lower frames  Rigid 4-post with patented laminated lower frames  Rigid 4-post with patented laminated lower frames
Blade Engagement  Centrifugal clutch  Centrifugal clutch  Centrifugal clutch
Blade Guide System  Fixed & adjustable  Fixed & adjustable  Fixed & adjustable
Blade Guides  Machined pillow-block with rear-thrust bearing  Machined pillow-block with rear-thrust bearing  Machined pillow-block with rear-thrust bearing
Carriage Wheels  Machined with sealed bearings  Machined with sealed bearings  Machined with sealed bearings
Log Rests  Long and short (x2)  Long and short (x2)  Long and short (x2)
Log Clamp  Screw-dog (x1)  Screw-dog (x1)  Screw-dog (x1)
Depth-of-Cut Scale  2”, 1”, 9/8”, 6/4” and ¾”  2”, 1”, 9/8”, 6/4” and ¾”  2”, 1”, 9/8”, 6/4” and ¾”
Finish  Powder-coat & zinc-plated  Powder-coat & zinc-plated  Powder-coat & zinc-plated