SHARPER, SMARTER BLADE SOLUTION
CRANKED UP BLADE PERFORMANCE
still have questions?
Whether you’re cutting hard or softwood, a sharp bandsaw blade is essential to produce high-quality lumber on your portable sawmill. A sharp blade cuts with less effort meaning less strain for you and your sawmill’s engine. A dull blade may rub against the material instead of cutting it cleanly, decreasing sawing efficiency, causing blade wander and producing poor quality cuts. Continued milling with a dull bandsaw blade increases the risk of overheating, binding, and blade breakage, compromising both operator safety and lumber quality.
For optimal performance of a standard carbon blade, it's recommended to sharpen the blade profile approximately every two hours of cutting time. We advise honing the blade tips to maintain their sharpness rather than grinding a dull blade to reshape the edge.
Wear and tear resulting from regular use is a natural part of the life span of a band blade, which are subject to high physical loads on a daily basis. Visually inspect a blade for signs of stress, cracks in the metal, heavy wear, or damage to determine if it is safe to put back on the sawmill. When the metal gets fatigued and visible cracks are seen in the gullet, this is a serious sign to retire the blade. Tooth breakage can happen at any point in the blade’s life as a result from striking a foreign object such as a rock or nail and will quickly put an unnatural end to a band blade.
The number of teeth and the angle at which they are offset is referred to as tooth set. Tooth set affects cutting efficiency, and quality of the cut. Sawmill band blades typically follow a Raker three tooth pattern with a uniform set distance left and right, and a third straight “raker” tooth.
Bandsaw blades need to have the teeth set to produce material with a high-quality surface and effectively remove the sawdust from the milled log. A new blade will come with the manufacturer’s recommended set; however, with regular use teeth naturally lose their set, or flatten, over time, which reduces blade efficiency. When the blade strikes a nail or other foreign object if the teeth are not broken off, they will be knocked out of set. Poor set can cause the blade to dive/climb or produce wavy or scored boards and even generate excessive heat due to poor sawdust ejection, leading to premature failure or breakage.